Three Station Electric Actuator-manufacture,factory,supplier from China

(Total 24 Products for Three Station Electric Actuator)
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
  Contact Now
Byword1. can realize electric energy storage. 2. can realize electric opening and closing. 3. can allow automatic reclosing. 4.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Byword1. can realize electric energy storage.2. can realize electric opening and closing.3. can allow automatic reclosing.4. with mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product DescriptionCYD-4.6 hydraulic disc spring actuator is suitable for the product package of three-phase mechanical linkage operation of 252KV-800KV sulfur hexafluoride high-voltage circuit breakers.CYD-4.6 hydraulic disc spring actuator is an integrated structure of energy storage cylinder, working cylinder and control valve, which adopts annular energy storage cylinder and advanced sealing technology, realizing high reliability of hydraulic system.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product DescriptionOutdoor high-voltage switchgear with three-phase AC 50Hz.Composed of actuator, conductive circuit, insulation system, sealing and shell, the overall structure is three-phase common box type.It is used for dividing and closing load current, overload current, short-circuit current and other similar places.Product Technical ParametersRated voltage: 12KVRated current: 630AFrequency withstand voltage (1min): (pole to pole, pole to ground) 42KV / (vacuum break) 48KVLightning impact withstand voltage (peak): (pole to pole, pole to ground) 75KV / (vacuum interrupter) 85KVRated short
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Relate News
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
On November 7, 2021, the leaders of State Grid Electric Power System, Secretary Bi Keli, Secretary Wei Guanglin, Professor Guo Qinxian, General Manager Bi Lejun and Manager Cao Jin, went to Taihe Power Group to inspect and guide the work. Zhang Shumin, Chairman of the Group, Wang Dawei, General Manager of DENK Hydraulic, and Sun Lili, General Manager of Power Equipment accompanied.Mr.
On the morning of March 11, Shandong University of Science and Technology and Shandong Taihe Electric Power Group successfully held a university-enterprise cooperation launching ceremony. Zhang Qingyun, Secretary of the Party Group and Director of Tai'an Science and Technology Bureau, Zhou Pengfei, Deputy Secretary of Taishan District Party Committee and Mayor of Taishan District, and other leaders were present to witness the launching ceremony of the university-enterprise cooperation.The meeting was held in a grand and warm atmosphere.
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
On April 15, Zhang Feng, chairman of Shandong Electric Hitachi High Voltage Switchgear Co., Ltd., visited and guided Taihe Power Group. Xu Jiazhong, deputy chief engineer, Xing Huaijin, director of the quality control department, and Fang Fang, deputy director of the purchasing department, also visited Taihe Power Group. Nan and Wang Dong are the head of the technical department.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.
On April 6, Zhang Hongtao, general manager of Pinggao Weihai High Voltage Electric Apparatus Co., Ltd, Zou Zhongping, chief accountant, and Zhang Pifeng, chief of material section, visited Taihe Power Group, and Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, general managers of all the subsidiaries of the group, and senior executives of the group received them kindly and expressed their warm welcome.Accompanied by the chairman of the board of directors and general managers of subsidiaries of Taihe Power Group, General Manager Zhang a
The flying of the dragon flying the flying of the future --Taihe Electric Power Group "Family and Enterprise Hand in Hand, Creating the Future Together" Staff's Family Open Day Activity Successfully HeldToday starts a different journeyWalking with you on the road I walk every dayTo show you the positions I holdLet you know me at workAnd thank you for your support and dedication to meIn order to enhance the communication between the enterprise and the staff's family members, let the family members feel the development of the enterprise and the working environment of the family
Autumn high and refreshing osmanthus fragrance, a long time the sun is coming again, the ninth day of the ninth month of the lunar calendar is China's "Elderly People's Day", in the process of creating a civilized city in the new era, conveying an important message: the elderly need to be more caring, need to be healthy, need to be happy.
On the morning of April 6, Taian second-level inspector, the city's power transmission equipment and wire and cable industry chain deputy chain director Dong Shiwu, Taian Science and Technology Bureau party secretary Yang Jianquan, Taian Science and Technology Bureau deputy director Sun Yingsheng, TBEA Group vice president Zhao Wang, TBEA Shandong Luneng Taishan Cable has the company's party committee secretary, general manager Qin Tian and other 10 people, to visit the Taizhou Electric Power Group, research, and to promote the new situation in the field of electric power business deve