Three-station Unit Module-manufacture,factory,supplier from China

(Total 24 Products for Three-station Unit Module)
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
Contact Now
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Relate News
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
On April 6, Zhang Hongtao, general manager of Pinggao Weihai High Voltage Electric Apparatus Co., Ltd, Zou Zhongping, chief accountant, and Zhang Pifeng, chief of material section, visited Taihe Power Group, and Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, general managers of all the subsidiaries of the group, and senior executives of the group received them kindly and expressed their warm welcome.Accompanied by the chairman of the board of directors and general managers of subsidiaries of Taihe Power Group, General Manager Zhang a
On the morning of April 6, Taian second-level inspector, the city's power transmission equipment and wire and cable industry chain deputy chain director Dong Shiwu, Taian Science and Technology Bureau party secretary Yang Jianquan, Taian Science and Technology Bureau deputy director Sun Yingsheng, TBEA Group vice president Zhao Wang, TBEA Shandong Luneng Taishan Cable has the company's party committee secretary, general manager Qin Tian and other 10 people, to visit the Taizhou Electric Power Group, research, and to promote the new situation in the field of electric power business deve
Tai'an City's new industrialization and strong city strategy has sounded the clarion call for high-quality development in Tai'an City. Especially since the establishment of the power transmission and transformation and wire and cable industry chain in Tai'an City, Taihe Power, as one of them, has insisted on self-reliance and self-improvement through science and technology, and actively sorted out the industrial chain map.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.
"A stone is laid for a thousand autumns, and ten thousand people make a hundred generations of work".On 26th February 2024, the foundation stone laying ceremony of the new intelligent industrial park project of Taihe Electric Power Group was successfully held, and it also participated in the first quarter of 2024 "Project Startup Competition" of Tai'an City, and it was set up as the main venue of Taishan District, and the ceremony was a complete success.
In order to celebrate the May 1st International Labor Day, enhance the cohesion of employees, enhance teamwork, and enrich amateur cultural life, under the premise of preventing and controlling the epidemic, the Taihe Power Labor Union held the "May 1st Celebration" employee tug-of-war competition of Taihe Power Group.There are 10 teams in total, including 6 men's teams and 4 women's teams.
Youth breeds infinite hope, and youth creates a better tomorrow. For thousands of years, the power of youth, the surge of youth, and the creation of youth have always been the majestic force that pushes the Chinese nation forward bravely and stands among the nations of the world. Struggle is the brightest background of youth, and action is the most effective tempering of youth.
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
x

Submitted successfully

We will contact you as soon as possible

Close