Three-position Mechanism-manufacture,factory,supplier from China

(Total 24 Products for Three-position Mechanism)
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionTHV on-load tap-changers are suitable for power transformers with rated voltages of 35 kV and 63 kV, maximum rated through-currents of 350 A and 500 A for three-phase and 350 A for single-phase, and a rated frequency of 50 Hz, and are used to change the tap position of the regulating coil to achieve the purpose of regulating the voltage in the load state. The THV on-load tap-changer is a composite structure that combines the functions of a diverter switch and a tap selector to form a selector switch that assumes both tap selection and load current switching.
Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Product DescriptionThe CT35 mechanism is a double clamp plate structure with a smaller overall size. The manual opening and closing operation, energy storage operation, counting indication, opening and closing indication, and energy storage indication of the mechanism are all on one surface, making it easy to operate and use. The mechanism adopts a driving claw driven block energy storage structure, which is easy to adjust and reliable in energy storage.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
Contact Now
Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
Contact Now
Relate News
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
In-depth study and implementation of the spirit of the national "two sessions", and strive to exceed the first half of the task instructions. In a higher position, comprehensively enhance the corporate capacity to set off again.In order to comprehensively sort out the completion of the work in the first quarter, to ensure that the established work objectives on time, efficiently promote, April 1, Taihe Power Group held a quarter "open the door" work summary and work deployment meeting.
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
On 11th March 2024, Chint Electric Group's purchasing department, technical department, R&D manager, quality inspection department and process department visited Taihe Electric Power Group for 550kV technical exchange meeting, accompanied by Zhang Shumin, chairman of the group, and Wang David, general manager of the branch.Visited the Group's high-voltage, extra-high voltage production base intelligent equipment production line, precision equipment testing line.
On the morning of February 11, Zhang Mingqiang, vice mayor of Taishan District People's Government of Tai'an City, visited Taihe Power Group to guide the work, focusing on understanding the group's China-Korea Industrial Park expansion of the new project and made important instructions. Mr. Zhang Shumin, Chairman of Taihe Power Group, made a detailed report.Mr.
Farewell to 2023, look back on the breakthrough extraordinary year; Step into 2024, prepare for the dragon time.
The morning of June 25, Taishan District, led by Zhang Peifeng, secretary and his party on-site inspection of this year's streets and towns, Taishan Economic Development Zone, Tai'an Agricultural High-tech Zone, the key projects to promote the construction of the "double recruiting, double attraction" and the effectiveness of the work of the new industrialization of the district to conduct a research.
On December 12, 2023, President Lee, Vice President Cao, Vice President Kim and Vice President Kwon of Korea Dillon Power Jurassic Association visited Taihe Power Group, accompanied by Mr.
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
x

Submitted successfully

We will contact you as soon as possible

Close