Spring Brake-manufacture,factory,supplier from China

(Total 24 Products for Spring Brake)
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
Contact Now
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.
Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionCYD-4.6 hydraulic disc spring actuator is suitable for the product package of three-phase mechanical linkage operation of 252KV-800KV sulfur hexafluoride high-voltage circuit breakers.CYD-4.6 hydraulic disc spring actuator is an integrated structure of energy storage cylinder, working cylinder and control valve, which adopts annular energy storage cylinder and advanced sealing technology, realizing high reliability of hydraulic system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Byword1. can realize electric energy storage. 2. can realize electric opening and closing. 3. can allow automatic reclosing. 4.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
ZN13 type spring-operated actuator is used to operate ZN12/ZN13 type indoor vacuum circuit breakers and other outdoor or indoor vacuum circuit breakers whose closing power is comparable to that of the former. Its performance meets the requirements of GB1987 AC High Voltage Circuit Breakers and product technical conditions.The closing spring energy storage methods of the mechanism include electric energy storage and manual energy storage. Solenoid and manual button can be used for opening and closing operation.
Contact Now
CT-1.0 spring-operated mechanism is suitable for operating LW35-40.5 self-charging SF6 circuit breakers and switchgear with power comparable to that of circuit breakers, and it can drive the circuit breaker body to carry out opening and closing operations, and realize the various performance indexes of circuit breakers.Ordering Instructionsa. Model, name, quantity.b. Control circuit voltage.c. Voltage of storage motor.d. Number of current transformer terminals.e. Check electrical components for special requirements.
Contact Now
Byword1. can realize electric energy storage.2. can realize electric opening and closing.3. can allow automatic reclosing.4. with mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Abstract1. Model and Name: Circuit Breaker Spring Mechanism CT1702. Main application and performanceThis mechanism can operate 126kV high voltage SF6 circuit breaker and gas insulated switchgear (GIS). Its performance meets the requirements of GB1984 "AC High Voltage Circuit Breakers", IEC56 "High Voltage AC Circuit Breakers" and "Product Technical Conditions".The mechanism can be electric energy storage and manual energy storage. Switch operation is divided into remote control operation, near electric operation and manual operation.3.
Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Product DescriptionThe CT35 mechanism is a double clamp plate structure with a smaller overall size. The manual opening and closing operation, energy storage operation, counting indication, opening and closing indication, and energy storage indication of the mechanism are all on one surface, making it easy to operate and use. The mechanism adopts a driving claw driven block energy storage structure, which is easy to adjust and reliable in energy storage.
Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Relate News
In April of late spring, hundreds of flowers compete with each other, and everything recovers. Taihe Power Group continues to uphold the original intention, with high-quality products and efficient service, do not stop, do not stop, and work together to create good results. Through the joint efforts of all staff, the Group achieved a good start with high growth in GDP in the first quarter!In every busy and energetic workshop of the Group.
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
Farewell to 2023, look back on the breakthrough extraordinary year; Step into 2024, prepare for the dragon time.
On December 12, 2023, President Lee, Vice President Cao, Vice President Kim and Vice President Kwon of Korea Dillon Power Jurassic Association visited Taihe Power Group, accompanied by Mr.
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
China-Russia talks, a new chapterOn March 11, Mr. Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, met with visiting Russian businessmen, and the two sides conducted in-depth discussions and exchanges on strengthening overseas cooperation. Zhang Shumin introduced the overall development of the Group and the future internationalization development plan.
In midsummer and July, the fire-like season, everything is so vibrant. In the production workshop of Taihe Electric Machinery Manufacturing Department, there is a busy scene. On various production lines such as CNC machining, the processed parts are being sent to the downstream process continuously.Clean and level roads, bright and clean glass, walking into the machinery manufacturing department, the new look makes all employees feel pure and comfortable.
On March 22-24, 2023 International Industry Cooperation Conference (Singapore) and China Machinery and Electronic Products Brand Exhibition was held in Marina Bay Sands Convention and Exhibition Center in Singapore, THEC actively corresponds to the policy of accelerating the construction of a trade power and participates in this exhibition to appear on the international stage. Mr. Zhang Shumin, Chairman of Taihe Power Group, and Mr.
In recent years, TAIHE Power Group has been awarded the title of ‘Excellent Supplier’ by a number of power industry companies for its excellent product quality, perfect service system and strong brand strength. This is not only the affirmation of our past efforts, but also the expectation of future cooperation. Behind this honour is the hard work and unremitting efforts of our team.Quality first, win trustWe always adhere to the principle of quality first, and win the trust of customers with excellent products and services.
Recently, the Department of Industry and Information Technology of Shandong Province and the Bureau of Industry and Information Technology of Tai'an City respectively announced the "Notice of the First Batch of Innovative Small and Medium-sized Enterprises in Shandong Province in 2023" and "The Announcement of the List of Technological Innovation Demonstration Enterprises in Tai'an City in 2023", Taihe, Tai'an City Electric Power Equipment Co., Ltd.
x

Submitted successfully

We will contact you as soon as possible

Close