Motorized Manipulator-manufacture,factory,supplier from China

(Total 24 Products for Motorized Manipulator)
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Product DescriptionTHV on-load tap-changers are suitable for power transformers with rated voltages of 35 kV and 63 kV, maximum rated through-currents of 350 A and 500 A for three-phase and 350 A for single-phase, and a rated frequency of 50 Hz, and are used to change the tap position of the regulating coil to achieve the purpose of regulating the voltage in the load state. The THV on-load tap-changer is a composite structure that combines the functions of a diverter switch and a tap selector to form a selector switch that assumes both tap selection and load current switching.
  Contact Now
BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing.With mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat
  Contact Now
Relate News
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
Youth breeds infinite hope, and youth creates a better tomorrow. For thousands of years, the power of youth, the surge of youth, and the creation of youth have always been the majestic force that pushes the Chinese nation forward bravely and stands among the nations of the world. Struggle is the brightest background of youth, and action is the most effective tempering of youth.
"A stone is laid for a thousand autumns, and ten thousand people make a hundred generations of work".On 26th February 2024, the foundation stone laying ceremony of the new intelligent industrial park project of Taihe Electric Power Group was successfully held, and it also participated in the first quarter of 2024 "Project Startup Competition" of Tai'an City, and it was set up as the main venue of Taishan District, and the ceremony was a complete success.
On the morning of February 11, Zhang Mingqiang, vice mayor of Taishan District People's Government of Tai'an City, visited Taihe Power Group to guide the work, focusing on understanding the group's China-Korea Industrial Park expansion of the new project and made important instructions. Mr. Zhang Shumin, Chairman of Taihe Power Group, made a detailed report.Mr.
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
On May 18th, the representative director of Korea YMIR Company: 이원창 Lee Yuanchang, the director of High Voltage HV Division: 김지욱 Kim Ji-wook, the representative director of Korea ENTEC Company: 박찬호 Park Zhanhao, and the responsible researcher of Technology Department: 강기문 Kang Ki-moon, came to our company to have a technical exchange and business cooperation negotiation, accompanied by the deputy secretary of the Party Committee of TEPCO, the general manager of the Hydraulic Pressure Company: David Wang, general manager of the Power Equipment Company: Sun Lili, and the executive vice president
In midsummer and July, the fire-like season, everything is so vibrant. In the production workshop of Taihe Electric Machinery Manufacturing Department, there is a busy scene. On various production lines such as CNC machining, the processed parts are being sent to the downstream process continuously.Clean and level roads, bright and clean glass, walking into the machinery manufacturing department, the new look makes all employees feel pure and comfortable.
On November 7, 2021, the leaders of State Grid Electric Power System, Secretary Bi Keli, Secretary Wei Guanglin, Professor Guo Qinxian, General Manager Bi Lejun and Manager Cao Jin, went to Taihe Power Group to inspect and guide the work. Zhang Shumin, Chairman of the Group, Wang Dawei, General Manager of DENK Hydraulic, and Sun Lili, General Manager of Power Equipment accompanied.Mr.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.