Motorized Mechanism-manufacture,factory,supplier from China

(Total 24 Products for Motorized Mechanism)
Product DescriptionThe CT35 mechanism is a double clamp plate structure with a smaller overall size. The manual opening and closing operation, energy storage operation, counting indication, opening and closing indication, and energy storage indication of the mechanism are all on one surface, making it easy to operate and use. The mechanism adopts a driving claw driven block energy storage structure, which is easy to adjust and reliable in energy storage.
  Contact Now
Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
  Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
  Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
  Contact Now
Abstract1. Model and Name: Circuit Breaker Spring Mechanism CT1702. Main application and performanceThis mechanism can operate 126kV high voltage SF6 circuit breaker and gas insulated switchgear (GIS). Its performance meets the requirements of GB1984 "AC High Voltage Circuit Breakers", IEC56 "High Voltage AC Circuit Breakers" and "Product Technical Conditions".The mechanism can be electric energy storage and manual energy storage. Switch operation is divided into remote control operation, near electric operation and manual operation.3.
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.
  Contact Now
CT-1.0 spring-operated mechanism is suitable for operating LW35-40.5 self-charging SF6 circuit breakers and switchgear with power comparable to that of circuit breakers, and it can drive the circuit breaker body to carry out opening and closing operations, and realize the various performance indexes of circuit breakers.Ordering Instructionsa. Model, name, quantity.b. Control circuit voltage.c. Voltage of storage motor.d. Number of current transformer terminals.e. Check electrical components for special requirements.
  Contact Now
ZN13 type spring-operated actuator is used to operate ZN12/ZN13 type indoor vacuum circuit breakers and other outdoor or indoor vacuum circuit breakers whose closing power is comparable to that of the former. Its performance meets the requirements of GB1987 AC High Voltage Circuit Breakers and product technical conditions.The closing spring energy storage methods of the mechanism include electric energy storage and manual energy storage. Solenoid and manual button can be used for opening and closing operation.
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Relate News
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
On 11th March 2024, Chint Electric Group's purchasing department, technical department, R&D manager, quality inspection department and process department visited Taihe Electric Power Group for 550kV technical exchange meeting, accompanied by Zhang Shumin, chairman of the group, and Wang David, general manager of the branch.Visited the Group's high-voltage, extra-high voltage production base intelligent equipment production line, precision equipment testing line.
Tai'an City's new industrialization and strong city strategy has sounded the clarion call for high-quality development in Tai'an City. Especially since the establishment of the power transmission and transformation and wire and cable industry chain in Tai'an City, Taihe Power, as one of them, has insisted on self-reliance and self-improvement through science and technology, and actively sorted out the industrial chain map.
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
May 10, 15:30 pm, Tai'an City CPPCC Chairman Comrade Wu Linzhong, Commissioner Comrade Dong Shiwu, Secretary General of the Municipal CPPCC Comrade Yang Chengxiu, transmission and cable and wire and cable industry chain task force staff to Taihe Power Group to investigate the key projects of the transmission and transformation industry chain - China-Korea Intelligent Equipment Industrial Park expansion project.
"A stone is laid for a thousand autumns, and ten thousand people make a hundred generations of work".On 26th February 2024, the foundation stone laying ceremony of the new intelligent industrial park project of Taihe Electric Power Group was successfully held, and it also participated in the first quarter of 2024 "Project Startup Competition" of Tai'an City, and it was set up as the main venue of Taishan District, and the ceremony was a complete success.
In order to deeply implement the spirit of the 20th CPC National Congress, educate and guide the majority of party members and cadres to deeply understand the precious spirit of the party, and draw strength of conviction from the spirit of revolution, the Party Committee of Taihe Electric Power, on the occasion of the 102nd anniversary of the founding of the Communist Party of China (CPC), joined hands with the Provincial Zhuangzhen Chamber of Commerce and its member enterprises to carry out the theme of "Ascending to a high level and looking to the party with one heart".At the begin
Safe production has always been the most basic management regulation of Taihe Power Group. The essence of safe production is to prevent various accidents during the production process. Safety work is the lifeline and happiness line of the company. If a company blindly pursues quality and progress without guaranteeing safety, then it will not take safety production as the management goal, there will be no benefits, there will be no stable development of the company and the family happiness of employees.
On May 18th, the representative director of Korea YMIR Company: 이원창 Lee Yuanchang, the director of High Voltage HV Division: 김지욱 Kim Ji-wook, the representative director of Korea ENTEC Company: 박찬호 Park Zhanhao, and the responsible researcher of Technology Department: 강기문 Kang Ki-moon, came to our company to have a technical exchange and business cooperation negotiation, accompanied by the deputy secretary of the Party Committee of TEPCO, the general manager of the Hydraulic Pressure Company: David Wang, general manager of the Power Equipment Company: Sun Lili, and the executive vice president
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.