Intex Tube-manufacture,factory,supplier from China

(Total 24 Products for Intex Tube)
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Byword1. can realize electric energy storage.2. can realize electric opening and closing.3. can allow automatic reclosing.4. with mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Byword1. Can realize manual and electric energy storage.2. Can realize manual and electric breaking and closing.3. Can realize slow breaking and closing function.4. Can allow automatic reclosing.5.
  Contact Now
Byword1. Can realize manual and electric energy storage.2. Can realize manual and electric breaking and closing.3. Can realize slow breaking and closing function.4. Can allow automatic reclosing.5.
  Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing.With mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat
  Contact Now
BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing.With mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat
  Contact Now
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
  Contact Now
Byword1. Can realize manual and electric energy storage.2. Can realize manual and electric breaking and closing.3. Can realize slow breaking and closing function. 4. Can allow automatic reclosing.5.
  Contact Now
Byword1. can realize manual and electric energy storage.2. can realize manual and electric breaking and closing. 3. can realize slow breaking and closing function.4. can allow automatic reclosing 5.
  Contact Now
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
  Contact Now
Relate News
At 17:00 on January 19, 2022, Taihe Power Party Branch Comrade Sun Lili participated in the 14th Congress of the Communist Party of China in Taishan District, Tai'an City, China, and immediately conveyed the spirit of the meeting of the Party Congress to all the party members of the branch.Zhang Peifeng, secretary of the Party Congress in a comprehensive and objective summary of our achievements in Taishan District in the past five years, our hard-won results, the experience is invaluable.
On December 12, 2023, President Lee, Vice President Cao, Vice President Kim and Vice President Kwon of Korea Dillon Power Jurassic Association visited Taihe Power Group, accompanied by Mr.
On May 18th, the representative director of Korea YMIR Company: 이원창 Lee Yuanchang, the director of High Voltage HV Division: 김지욱 Kim Ji-wook, the representative director of Korea ENTEC Company: 박찬호 Park Zhanhao, and the responsible researcher of Technology Department: 강기문 Kang Ki-moon, came to our company to have a technical exchange and business cooperation negotiation, accompanied by the deputy secretary of the Party Committee of TEPCO, the general manager of the Hydraulic Pressure Company: David Wang, general manager of the Power Equipment Company: Sun Lili, and the executive vice president
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
China-Russia talks, a new chapterOn March 11, Mr. Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, met with visiting Russian businessmen, and the two sides conducted in-depth discussions and exchanges on strengthening overseas cooperation. Zhang Shumin introduced the overall development of the Group and the future internationalization development plan.
In midsummer and July, the fire-like season, everything is so vibrant. In the production workshop of Taihe Electric Machinery Manufacturing Department, there is a busy scene. On various production lines such as CNC machining, the processed parts are being sent to the downstream process continuously.Clean and level roads, bright and clean glass, walking into the machinery manufacturing department, the new look makes all employees feel pure and comfortable.
On the morning of April 6, Taian second-level inspector, the city's power transmission equipment and wire and cable industry chain deputy chain director Dong Shiwu, Taian Science and Technology Bureau party secretary Yang Jianquan, Taian Science and Technology Bureau deputy director Sun Yingsheng, TBEA Group vice president Zhao Wang, TBEA Shandong Luneng Taishan Cable has the company's party committee secretary, general manager Qin Tian and other 10 people, to visit the Taizhou Electric Power Group, research, and to promote the new situation in the field of electric power business deve
Industrial enterprises achieved operating income of 268.01 billion yuan, an increase of 0.3% year-on-year, and a total profit of 12.72 billion yuan......
On the morning of March 11, Shandong University of Science and Technology and Shandong Taihe Electric Power Group successfully held a university-enterprise cooperation launching ceremony. Zhang Qingyun, Secretary of the Party Group and Director of Tai'an Science and Technology Bureau, Zhou Pengfei, Deputy Secretary of Taishan District Party Committee and Mayor of Taishan District, and other leaders were present to witness the launching ceremony of the university-enterprise cooperation.The meeting was held in a grand and warm atmosphere.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.