GIS Three-station Unit Module-manufacture,factory,supplier from China

(Total 24 Products for GIS Three-station Unit Module)
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
Contact Now
BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing 5.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Relate News
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.
The flying of the dragon flying the flying of the future --Taihe Electric Power Group "Family and Enterprise Hand in Hand, Creating the Future Together" Staff's Family Open Day Activity Successfully HeldToday starts a different journeyWalking with you on the road I walk every dayTo show you the positions I holdLet you know me at workAnd thank you for your support and dedication to meIn order to enhance the communication between the enterprise and the staff's family members, let the family members feel the development of the enterprise and the working environment of the family
On April 15, Zhang Feng, chairman of Shandong Electric Hitachi High Voltage Switchgear Co., Ltd., visited and guided Taihe Power Group. Xu Jiazhong, deputy chief engineer, Xing Huaijin, director of the quality control department, and Fang Fang, deputy director of the purchasing department, also visited Taihe Power Group. Nan and Wang Dong are the head of the technical department.
May 10, 15:30 pm, Tai'an City CPPCC Chairman Comrade Wu Linzhong, Commissioner Comrade Dong Shiwu, Secretary General of the Municipal CPPCC Comrade Yang Chengxiu, transmission and cable and wire and cable industry chain task force staff to Taihe Power Group to investigate the key projects of the transmission and transformation industry chain - China-Korea Intelligent Equipment Industrial Park expansion project.
On April 6, Zhang Hongtao, general manager of Pinggao Weihai High Voltage Electric Apparatus Co., Ltd, Zou Zhongping, chief accountant, and Zhang Pifeng, chief of material section, visited Taihe Power Group, and Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, general managers of all the subsidiaries of the group, and senior executives of the group received them kindly and expressed their warm welcome.Accompanied by the chairman of the board of directors and general managers of subsidiaries of Taihe Power Group, General Manager Zhang a
Recently, the Department of Industry and Information Technology of Shandong Province and the Bureau of Industry and Information Technology of Tai'an City respectively announced the "Notice of the First Batch of Innovative Small and Medium-sized Enterprises in Shandong Province in 2023" and "The Announcement of the List of Technological Innovation Demonstration Enterprises in Tai'an City in 2023", Taihe, Tai'an City Electric Power Equipment Co., Ltd.
On 11th March 2024, Chint Electric Group's purchasing department, technical department, R&D manager, quality inspection department and process department visited Taihe Electric Power Group for 550kV technical exchange meeting, accompanied by Zhang Shumin, chairman of the group, and Wang David, general manager of the branch.Visited the Group's high-voltage, extra-high voltage production base intelligent equipment production line, precision equipment testing line.
In April of late spring, hundreds of flowers compete with each other, and everything recovers. Taihe Power Group continues to uphold the original intention, with high-quality products and efficient service, do not stop, do not stop, and work together to create good results. Through the joint efforts of all staff, the Group achieved a good start with high growth in GDP in the first quarter!In every busy and energetic workshop of the Group.
x

Submitted successfully

We will contact you as soon as possible

Close