CYD-8 Hydraulic Disc Spring Operating Mechanism(Extended Type)-manufacture,factory,supplier from China

(Total 24 Products for CYD-8 Hydraulic Disc Spring Operating Mechanism(Extended Type))
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
  Contact Now
Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.
  Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
  Contact Now
Product DescriptionCYD-4.6 hydraulic disc spring actuator is suitable for the product package of three-phase mechanical linkage operation of 252KV-800KV sulfur hexafluoride high-voltage circuit breakers.CYD-4.6 hydraulic disc spring actuator is an integrated structure of energy storage cylinder, working cylinder and control valve, which adopts annular energy storage cylinder and advanced sealing technology, realizing high reliability of hydraulic system.
  Contact Now
Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.
  Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
  Contact Now
The production process and design are adopted the same kind of advanced and mature technology at home and abroad, which makes the product more advanced and novel. The product mechanism is simple, reliable, practical, small volume, light weight and low noise.General: Indoor/OutdoorAmbient air humidity: upper limit +40℃, lower limit -30℃.Altitude not exceeding 3000m.Relative humidity not more than 85%RH.Seismic intensity can not exceed 8 degrees.
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.
  Contact Now
Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.
  Contact Now
ZN13 type spring-operated actuator is used to operate ZN12/ZN13 type indoor vacuum circuit breakers and other outdoor or indoor vacuum circuit breakers whose closing power is comparable to that of the former. Its performance meets the requirements of GB1987 AC High Voltage Circuit Breakers and product technical conditions.The closing spring energy storage methods of the mechanism include electric energy storage and manual energy storage. Solenoid and manual button can be used for opening and closing operation.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CT35 mechanism is a double clamp plate structure with a smaller overall size. The manual opening and closing operation, energy storage operation, counting indication, opening and closing indication, and energy storage indication of the mechanism are all on one surface, making it easy to operate and use. The mechanism adopts a driving claw driven block energy storage structure, which is easy to adjust and reliable in energy storage.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
CT-1.0 spring-operated mechanism is suitable for operating LW35-40.5 self-charging SF6 circuit breakers and switchgear with power comparable to that of circuit breakers, and it can drive the circuit breaker body to carry out opening and closing operations, and realize the various performance indexes of circuit breakers.Ordering Instructionsa. Model, name, quantity.b. Control circuit voltage.c. Voltage of storage motor.d. Number of current transformer terminals.e. Check electrical components for special requirements.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Relate News
Industrial enterprises achieved operating income of 268.01 billion yuan, an increase of 0.3% year-on-year, and a total profit of 12.72 billion yuan......
In April of late spring, hundreds of flowers compete with each other, and everything recovers. Taihe Power Group continues to uphold the original intention, with high-quality products and efficient service, do not stop, do not stop, and work together to create good results. Through the joint efforts of all staff, the Group achieved a good start with high growth in GDP in the first quarter!In every busy and energetic workshop of the Group.
On 11th March 2024, Chint Electric Group's purchasing department, technical department, R&D manager, quality inspection department and process department visited Taihe Electric Power Group for 550kV technical exchange meeting, accompanied by Zhang Shumin, chairman of the group, and Wang David, general manager of the branch.Visited the Group's high-voltage, extra-high voltage production base intelligent equipment production line, precision equipment testing line.
On November 7, 2021, the leaders of State Grid Electric Power System, Secretary Bi Keli, Secretary Wei Guanglin, Professor Guo Qinxian, General Manager Bi Lejun and Manager Cao Jin, went to Taihe Power Group to inspect and guide the work. Zhang Shumin, Chairman of the Group, Wang Dawei, General Manager of DENK Hydraulic, and Sun Lili, General Manager of Power Equipment accompanied.Mr.
On May 18th, the representative director of Korea YMIR Company: 이원창 Lee Yuanchang, the director of High Voltage HV Division: 김지욱 Kim Ji-wook, the representative director of Korea ENTEC Company: 박찬호 Park Zhanhao, and the responsible researcher of Technology Department: 강기문 Kang Ki-moon, came to our company to have a technical exchange and business cooperation negotiation, accompanied by the deputy secretary of the Party Committee of TEPCO, the general manager of the Hydraulic Pressure Company: David Wang, general manager of the Power Equipment Company: Sun Lili, and the executive vice president
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
In order to celebrate the May 1st International Labor Day, enhance the cohesion of employees, enhance teamwork, and enrich amateur cultural life, under the premise of preventing and controlling the epidemic, the Taihe Power Labor Union held the "May 1st Celebration" employee tug-of-war competition of Taihe Power Group.There are 10 teams in total, including 6 men's teams and 4 women's teams.
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
China-Russia talks, a new chapterOn March 11, Mr. Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, met with visiting Russian businessmen, and the two sides conducted in-depth discussions and exchanges on strengthening overseas cooperation. Zhang Shumin introduced the overall development of the Group and the future internationalization development plan.
The morning of June 25, Taishan District, led by Zhang Peifeng, secretary and his party on-site inspection of this year's streets and towns, Taishan Economic Development Zone, Tai'an Agricultural High-tech Zone, the key projects to promote the construction of the "double recruiting, double attraction" and the effectiveness of the work of the new industrialization of the district to conduct a research.