CJ8-1 Single Motor Three-station Electric Operating Mechanism-manufacture,factory,supplier from China

(Total 24 Products for CJ8-1 Single Motor Three-station Electric Operating Mechanism)
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
  Contact Now
Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
  Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
  Contact Now
Relate News
Industrial enterprises achieved operating income of 268.01 billion yuan, an increase of 0.3% year-on-year, and a total profit of 12.72 billion yuan......
On 13th January 2024, Taihe Power Group held the 2024 work deployment conference to plan and deploy the work in 2024 with respect to the 3+9+1 requirements put forward in the 2023 year-end conference. At the same time, call and mobilise all staff to emancipate their minds, seize the opportunity, actively respond to the Group's instructions and requirements, and carry out all the work in a solid and effective manner, so as to build up momentum and empowerment for the completion of the target tasks in 2024.Years and years, the mountains and rivers are towering.
On 27 March, Taihe Power Group held the 2024 Work Conference on Work Safety and the Mobilisation and Deployment Meeting of the Three-Year Action Plan for Work Safety Governance to convey the spirit of the documents related to work safety from the higher level, inform the Group of the work on safety and environmental protection in the first quarter, analyse the current situation of work safety, and carry out the deployment of work for the implementation of the key tasks of the Three-Year Action Plan for Work Safety Governance and the key points of the work for the year of 2024. The meeting
In order to deeply implement the spirit of the 20th CPC National Congress, educate and guide the majority of party members and cadres to deeply understand the precious spirit of the party, and draw strength of conviction from the spirit of revolution, the Party Committee of Taihe Electric Power, on the occasion of the 102nd anniversary of the founding of the Communist Party of China (CPC), joined hands with the Provincial Zhuangzhen Chamber of Commerce and its member enterprises to carry out the theme of "Ascending to a high level and looking to the party with one heart".At the begin
In-depth study and implementation of the spirit of the national "two sessions", and strive to exceed the first half of the task instructions. In a higher position, comprehensively enhance the corporate capacity to set off again.In order to comprehensively sort out the completion of the work in the first quarter, to ensure that the established work objectives on time, efficiently promote, April 1, Taihe Power Group held a quarter "open the door" work summary and work deployment meeting.
On the morning of March 11, Shandong University of Science and Technology and Shandong Taihe Electric Power Group successfully held a university-enterprise cooperation launching ceremony. Zhang Qingyun, Secretary of the Party Group and Director of Tai'an Science and Technology Bureau, Zhou Pengfei, Deputy Secretary of Taishan District Party Committee and Mayor of Taishan District, and other leaders were present to witness the launching ceremony of the university-enterprise cooperation.The meeting was held in a grand and warm atmosphere.
On November 7, 2021, the leaders of State Grid Electric Power System, Secretary Bi Keli, Secretary Wei Guanglin, Professor Guo Qinxian, General Manager Bi Lejun and Manager Cao Jin, went to Taihe Power Group to inspect and guide the work. Zhang Shumin, Chairman of the Group, Wang Dawei, General Manager of DENK Hydraulic, and Sun Lili, General Manager of Power Equipment accompanied.Mr.
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
On April 15, Zhang Feng, chairman of Shandong Electric Hitachi High Voltage Switchgear Co., Ltd., visited and guided Taihe Power Group. Xu Jiazhong, deputy chief engineer, Xing Huaijin, director of the quality control department, and Fang Fang, deputy director of the purchasing department, also visited Taihe Power Group. Nan and Wang Dong are the head of the technical department.
On April 25th, the general manager of Taiwan Zhongxing mainland branch-Jiangsu Zhongxing Chuangyuan High Voltage Electric Co., Ltd, Daniel Lee, the vice manager of Technical Research Department, Hu Wei, the vice manager of Quality Assurance Department, Li Hangshuan, and his team of leaders visited Taihe Power Group to guide the work, and were warmly received by the secretary of the Party Committee and the chairman of the board of directors, Mr. Zhang Shumin, the general manager of subsidiaries, Mr. Wang Dawei, Mr. Sun Lily, the director of the Group's marketing department, Mr.