CJ55 Single-phase Isolation Operating Mechanism-manufacture,factory,supplier from China

(Total 24 Products for CJ55 Single-phase Isolation Operating Mechanism)
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Product DescriptionTHV on-load tap-changers are suitable for power transformers with rated voltages of 35 kV and 63 kV, maximum rated through-currents of 350 A and 500 A for three-phase and 350 A for single-phase, and a rated frequency of 50 Hz, and are used to change the tap position of the regulating coil to achieve the purpose of regulating the voltage in the load state. The THV on-load tap-changer is a composite structure that combines the functions of a diverter switch and a tap selector to form a selector switch that assumes both tap selection and load current switching.
Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product descriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Product DescriptionThe CTD-III spring mechanism is a high-power three-phase mechanical operating mechanism that uses springs as energy storage components. The energy storage of the spring is achieved through the rotation device of the motor and the transmission of various gears, and is maintained in the energy storage state through the energy storage and maintenance system.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Main application and performanceCJ8 series three-position electric actuator adopts modularized structure, which has the advantages of simple structure, reliable action, smooth operation, reliable self-locking, accurate repetitive positioning, small volume, light weight, easy installation and commissioning.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.
Contact Now
Relate News
Industrial enterprises achieved operating income of 268.01 billion yuan, an increase of 0.3% year-on-year, and a total profit of 12.72 billion yuan......
Assembly production base is located in the southern district of Taihe Power Group, covering an area of 12,000 square meters, is a comprehensive workshop integrating production, research and development, assembly and test, with more than 160 employees, more than 20 engineers and technicians, and 60% of them are college graduates or above, with more than one hundred types of mechanisms such as spring mechanisms, single motors, double motors, motorized mechanisms, electric spring mechanisms, and so on, and at the same time, equipped with 100,000-grade cleanliness workshop, test hall, automatic te
On 11th March 2024, Chint Electric Group's purchasing department, technical department, R&D manager, quality inspection department and process department visited Taihe Electric Power Group for 550kV technical exchange meeting, accompanied by Zhang Shumin, chairman of the group, and Wang David, general manager of the branch.Visited the Group's high-voltage, extra-high voltage production base intelligent equipment production line, precision equipment testing line.
On May 18th, the representative director of Korea YMIR Company: 이원창 Lee Yuanchang, the director of High Voltage HV Division: 김지욱 Kim Ji-wook, the representative director of Korea ENTEC Company: 박찬호 Park Zhanhao, and the responsible researcher of Technology Department: 강기문 Kang Ki-moon, came to our company to have a technical exchange and business cooperation negotiation, accompanied by the deputy secretary of the Party Committee of TEPCO, the general manager of the Hydraulic Pressure Company: David Wang, general manager of the Power Equipment Company: Sun Lili, and the executive vice president
In order to celebrate the May 1st International Labor Day, enhance the cohesion of employees, enhance teamwork, and enrich amateur cultural life, under the premise of preventing and controlling the epidemic, the Taihe Power Labor Union held the "May 1st Celebration" employee tug-of-war competition of Taihe Power Group.There are 10 teams in total, including 6 men's teams and 4 women's teams.
In order to solidly carry out a good safety production start "the first lesson" activities, to prevent the resumption of production safety accidents during the resumption of production, hosted by the Provincial Emergency Department, Tai'an City Emergency Response Bureau, Taishan District People's Government to host the safety production start "the first lesson" live activities will be held on February 19, 2024 (Monday) 9:30 a.m.
On April 15, Zhang Feng, chairman of Shandong Electric Hitachi High Voltage Switchgear Co., Ltd., visited and guided Taihe Power Group. Xu Jiazhong, deputy chief engineer, Xing Huaijin, director of the quality control department, and Fang Fang, deputy director of the purchasing department, also visited Taihe Power Group. Nan and Wang Dong are the head of the technical department.
The morning of June 25, Taishan District, led by Zhang Peifeng, secretary and his party on-site inspection of this year's streets and towns, Taishan Economic Development Zone, Tai'an Agricultural High-tech Zone, the key projects to promote the construction of the "double recruiting, double attraction" and the effectiveness of the work of the new industrialization of the district to conduct a research.
In April of late spring, hundreds of flowers compete with each other, and everything recovers. Taihe Power Group continues to uphold the original intention, with high-quality products and efficient service, do not stop, do not stop, and work together to create good results. Through the joint efforts of all staff, the Group achieved a good start with high growth in GDP in the first quarter!In every busy and energetic workshop of the Group.
On April 6, Zhang Hongtao, general manager of Pinggao Weihai High Voltage Electric Apparatus Co., Ltd, Zou Zhongping, chief accountant, and Zhang Pifeng, chief of material section, visited Taihe Power Group, and Zhang Shumin, secretary of the Party committee and chairman of the board of directors of Taihe Power Group, general managers of all the subsidiaries of the group, and senior executives of the group received them kindly and expressed their warm welcome.Accompanied by the chairman of the board of directors and general managers of subsidiaries of Taihe Power Group, General Manager Zhang a
x

Submitted successfully

We will contact you as soon as possible

Close