Product DescriptionOutdoor high-voltage switchgear with three-phase AC 50Hz.Composed of actuator, conductive circuit, insulation system, sealing and shell, the overall structure is three-phase common box type.It is used for dividing and closing load current, overload current, short-circuit current and other similar places.Product Technical ParametersRated voltage: 12KVRated current: 630AFrequency withstand voltage (1min): (pole to pole, pole to ground) 42KV / (vacuum break) 48KVLightning impact withstand voltage (peak): (pole to pole, pole to ground) 75KV / (vacuum interrupter) 85KVRated short
Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Worm gear transmission, at the same time with manual, electricWith slow split and slow close function.
Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
Contact Now
With fast grounding function, at the same time with manual, electricWith slow split and slow close function.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Product DescriptionThe CJ55 two station operating mechanism is a mechanism that can achieve linear isolation and corner isolation. The supporting mechanism is suitable for the voltage level of 550KV. The overall structure assembly of the mechanism is simple, the operation is reliable, and it can quickly achieve the opening and closing operation of the mechanism.
Contact Now
Abstract1. Model and Name: Circuit Breaker Spring Mechanism CT1702. Main application and performanceThis mechanism can operate 126kV high voltage SF6 circuit breaker and gas insulated switchgear (GIS). Its performance meets the requirements of GB1984 "AC High Voltage Circuit Breakers", IEC56 "High Voltage AC Circuit Breakers" and "Product Technical Conditions".The mechanism can be electric energy storage and manual energy storage. Switch operation is divided into remote control operation, near electric operation and manual operation.3.
Contact Now
CT-1.0 spring-operated mechanism is suitable for operating LW35-40.5 self-charging SF6 circuit breakers and switchgear with power comparable to that of circuit breakers, and it can drive the circuit breaker body to carry out opening and closing operations, and realize the various performance indexes of circuit breakers.Ordering Instructionsa. Model, name, quantity.b. Control circuit voltage.c. Voltage of storage motor.d. Number of current transformer terminals.e. Check electrical components for special requirements.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m. Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.
Contact Now
Product DescriptionCYD-4.6 hydraulic disc spring actuator is suitable for the product package of three-phase mechanical linkage operation of 252KV-800KV sulfur hexafluoride high-voltage circuit breakers.CYD-4.6 hydraulic disc spring actuator is an integrated structure of energy storage cylinder, working cylinder and control valve, which adopts annular energy storage cylinder and advanced sealing technology, realizing high reliability of hydraulic system.
Contact Now
Product DescriptionIt has a rotating arc extinguishing method that utilizes the electromagnetic force generated by the current flowing in the main circuit of the switch to cut off the current, reducing the burden on the operating mechanism.The shell is formed by hydraulic expansion with 1500 air pressures, with the smallest welding length and the strongest circular shape to withstand internal and external pressure, thus maintaining high accuracy and high quality.Product Technical Parameters1.Rated voltage: 12KV2.Rated current: 630A3.Rated short time withstand current: 20KA4.Rated short time wi
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V  
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V  
Contact Now
Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V  
Contact Now