35kV On-load Tap-changer-manufacture,factory,supplier from China

Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.

Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.

Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.

Product DescriptionThe THVM on-load tap-changer is suitable for voltage regulation of power transformers or industrial transformers with rated voltages of 35 kV, 63 kV, 110 kV, 150 kV and 220 kV, with a maximum rated through-current of 800 A for three-phase and 1500 A for single-phase, and with a frequency of 50 Hz, by means of a change of the tap position of the regulating coil under load.

Product DescriptionTHV on-load tap-changers are suitable for power transformers with rated voltages of 35 kV and 63 kV, maximum rated through-currents of 350 A and 500 A for three-phase and 350 A for single-phase, and a rated frequency of 50 Hz, and are used to change the tap position of the regulating coil to achieve the purpose of regulating the voltage in the load state. The THV on-load tap-changer is a composite structure that combines the functions of a diverter switch and a tap selector to form a selector switch that assumes both tap selection and load current switching.

Product DescriptionThe CT35 mechanism is a double clamp plate structure with a smaller overall size. The manual opening and closing operation, energy storage operation, counting indication, opening and closing indication, and energy storage indication of the mechanism are all on one surface, making it easy to operate and use. The mechanism adopts a driving claw driven block energy storage structure, which is easy to adjust and reliable in energy storage.

Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.

Product DescriptionIt has a rotating arc extinguishing method that utilizes the electromagnetic force generated by the current flowing in the main circuit of the switch to cut off the current, reducing the burden on the operating mechanism.The shell is formed by hydraulic expansion with 1500 air pressures, with the smallest welding length and the strongest circular shape to withstand internal and external pressure, thus maintaining high accuracy and high quality.Product Technical Parameters1.Rated voltage: 12KV2.Rated current: 630A3.Rated short time withstand current: 20KA4.Rated short time wi

Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.

Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.

Product DescriptionOutdoor high-voltage switchgear with three-phase AC 50Hz.Composed of actuator, conductive circuit, insulation system, sealing and shell, the overall structure is three-phase common box type.It is used for dividing and closing load current, overload current, short-circuit current and other similar places.Product Technical ParametersRated voltage: 12KVRated current: 630AFrequency withstand voltage (1min): (pole to pole, pole to ground) 42KV / (vacuum break) 48KVLightning impact withstand voltage (peak): (pole to pole, pole to ground) 75KV / (vacuum interrupter) 85KVRated short

CT-1.0 spring-operated mechanism is suitable for operating LW35-40.5 self-charging SF6 circuit breakers and switchgear with power comparable to that of circuit breakers, and it can drive the circuit breaker body to carry out opening and closing operations, and realize the various performance indexes of circuit breakers.Ordering Instructionsa. Model, name, quantity.b. Control circuit voltage.c. Voltage of storage motor.d. Number of current transformer terminals.e. Check electrical components for special requirements.

Abstract1. Model and Name: Circuit Breaker Spring Mechanism CT1702. Main application and performanceThis mechanism can operate 126kV high voltage SF6 circuit breaker and gas insulated switchgear (GIS). Its performance meets the requirements of GB1984 "AC High Voltage Circuit Breakers", IEC56 "High Voltage AC Circuit Breakers" and "Product Technical Conditions".The mechanism can be electric energy storage and manual energy storage. Switch operation is divided into remote control operation, near electric operation and manual operation.3.

BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing.With mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat

Byword1. Can realize manual and electric energy storage.2. Can realize manual and electric breaking and closing.3. Can realize slow breaking and closing function. 4. Can allow automatic reclosing.5.

Byword1. can realize manual and electric energy storage.2. can realize manual and electric breaking and closing. 3. can realize slow breaking and closing function.4. can allow automatic reclosing 5.

Byword1. Can realize manual and electric energy storage.2. Can realize manual and electric breaking and closing.3. Can realize slow breaking and closing function. 4. Can allow automatic reclosing.5.

BywordCan realize manual and electric energy storage.Can realize manual and electric breaking and closing.Can realize slow breaking and closing function.Can allow automatic reclosing.With mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat

Byword1. can realize manual and electric energy storage.2. can realize manual and electric breaking and closing.3. can realize slow breaking and closing function.4. can allow automatic reclosing.5.

Byword1. can realize manual and electric energy storage.2. can realize manual and electric breaking and closing .3. can realize slow breaking and closing function .4. can allow automatic reclosing. 5.

Bywordcan realize manual and electric energy storage.can realize manual and electric breaking and closing.can realize slow breaking and closing function.can allow automatic reclosing.with mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperat