110kV-252kV Disconnecting Earthing Switch Unit Module-manufacture,factory,supplier from China

Product descriptionThe CJ8-6 operating mechanism can be used to close and open ZF23-126, ZF□-126, as well as disconnectors, earth switches and load switches, with torque requirements comparable to those of the above mentioned switches.The mechanism has three stations. One mechanism can operate one disconnecting switch and one earthing switch for closing and breaking of the disconnecting switch as well as closing and breaking of the earthing switch. The mechanism has both manual and electric operation modes.Operating conditions1. Ambient air temperature: upper limit +60℃, lower limit -30.2.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Product descriptionThe CJ34 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Product abstractThe CT32 operating mechanism can be used to close and open ZF10-126, ZF5T-126, ZF12-126, ZF4A-126, ZF31-126, ZF21-126, ZF29-126, ZF25-126, ZF39-126, ZF35-126, ZF34-252, as well as disconnecting, earthing and load switches. The required torque is comparable to that of the above mentioned switches.The closing and opening positions and output angles of the mechanism are ensured by a clutch and worm gearing through the forward and reverse function of the motor. The mechanism has both manual and electric functions.Operating conditions1.

Byword1. can realize electric energy storage.2. can realize electric opening and closing.3. can allow automatic reclosing.4. with mechanical anti-tripping device.Usage ScenariosGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Product DescriptionTHV on-load tap-changers are suitable for power transformers with rated voltages of 35 kV and 63 kV, maximum rated through-currents of 350 A and 500 A for three-phase and 350 A for single-phase, and a rated frequency of 50 Hz, and are used to change the tap position of the regulating coil to achieve the purpose of regulating the voltage in the load state. The THV on-load tap-changer is a composite structure that combines the functions of a diverter switch and a tap selector to form a selector switch that assumes both tap selection and load current switching.

Product DescriptionCYD-4.6 hydraulic disc spring actuator is suitable for the product package of three-phase mechanical linkage operation of 252KV-800KV sulfur hexafluoride high-voltage circuit breakers.CYD-4.6 hydraulic disc spring actuator is an integrated structure of energy storage cylinder, working cylinder and control valve, which adopts annular energy storage cylinder and advanced sealing technology, realizing high reliability of hydraulic system.

Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.

Product DescriptionThe CYD-4 series hydraulic disc spring operating mechanism uses disc springs as energy storage components. The disc springs have excellent force characteristics, are not affected by environmental temperature, store a large amount of energy, and have smooth force characteristics. Its structure adopts an integrated module design without pipeline connection.

Byword1. can realize manual and electric energy storage.2. can realize manual and electric breaking and closing. 3. can realize slow breaking and closing function.4. can allow automatic reclosing 5.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220V                                                                                                                                           

Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement.

Output torque 100-252N-m (both available)Output angle 60-300°(both available)Voltage range DC110V, DC125, DC220VGeneral: Indoor/OutdoorAmbient air humidity: upper limit +60℃, lower limit -30℃.Altitude not exceeding 3000m.Wind pressure not exceeding 700Pa (equivalent to a wind speed of 34m/s)No fire, explosion danger, serious filth, no corrosive gas, no violent vibration occasions.Special: can be customized according to the actual needs, such as: high altitude, low temperature, heat, humidity, etc.

Product DescriptionThe CT17 spring operating mechanism adopts a clamp type structure, with the energy storage motor and driving part, closing cam and connecting rod, auxiliary switch, etc. arranged in the middle of the left and right side plates, ensuring reasonable force and good stability of each part. The closing spring, wiring terminal, and travel switch are arranged on the outer side of the side panel for easy maintenance and replacement. The main shaft has rolling bearings at both ends, which are flexible in rotation and have high transmission efficiency.

Product DescriptionThe main hydraulic components of CYD-8 series hydraulic disc spring actuator include combined disc spring, working cylinder, control valve, oil pump motor, energy storage cylinder, travel switch, safety valve, high-pressure oil drain valve, low-pressure oil tank, connecting seat and other components; adopting the disc spring as the energy storage component, the disc spring has excellent force characteristics, is not affected by the ambient temperature, the stored energy is large, and the force characteristics are smooth.